Weekend Projects – Aug 24, 2015

Box Joint Jig
Box

This was my project for this last weekend. I have a bunch of pictures. As you will find I am not much on writing and am still trying to get comfortable with the whole blogging thing. So hopefully you will stay with me and we’ll see if I get any better.

The plans for this project can be found at http://www.plansnow.com/. They were also in one of the back issues of WoodSmith mag. I don’t remember the issue number.

I did modify the plans a bit. I added a track for adjusting for miter slots. I may want to use this with my router table as well.

Now that I have finished this and have make some cuts. I am thinking I may make a different type that will only cut one size. This one will be great for making different size box joints. But I want one that I can just throw it on the saw and cut without adjusting it and just think about the project at hand.

So I will update you on next Weekends Projects. The plan is to make a wall mounted portable tape dispenser organizer. Along with a wood floor desk carpet mat for my office. What project are you going to be working? See you next week.

Here's where I started, with some scraps and a couple dollars of hardware.
Here’s where I started, with some scraps and a couple dollars of hardware.

More scrap and hardware.
More scrap and hardware.

More of some of the scrap wood I will be using.
More of some of the scrap wood I will be using.
I started with some Oak scrap I had from a desk I got for free and about $8 of hardware. I had the track that was a gift from my kids. Oh I did spend an additional $3.59 for some Oak trim for the backer boards.

 

I was going to use hardboard as the plans had. But the smallest I could find was 4’x8′ at around $15. I got a trim Oak strip 1-1/2″ x 48″ and cut them to size at 1/5th the cost.

Backer boards. $3.59 1-1/2" x 48" cut to 5" chunk and mount hole drilled
Backer boards. $3.59 1-1/2″ x 48″ cut to 5″ chunk and mount hole drilled

 

Dry fit Fence setting on base.
Dry fit setting on base.

Dry fit movable fence setting on base.
Dry fit movable fence setting on base.

Dry fit both movable and non-movable fence setting on base.
Dry fit both movable and non-movable fence setting on base.

Dry fit on my saw
Dry fit on my saw

Dry fit on my saw
Dry fit on my saw

Dry fit on my saw
Dry fit on my saw

Dry fit test run
Dry fit test run

Dry fit test run
Dry fit test run

Test cuts
Test cuts

Playing around
Playing around

Playing around
Playing around

Playing around
Playing around

Finished and put together
Finished and put together

Finished and put together
Finished and put together

Finished and put together
Finished and put together

Finished and put together. With backer boards
Finished and put together. With backer boards

Finished and put together
Finished and put together

Finished and put together. Saw mounted
Finished and put together. Saw mounted

Finished and put together. Saw mounted
Finished and put together. Saw mounted

Finished and put together. Saw mounted
Finished and put together. Saw mounted

Finished and put together. Saw mounted
Finished and put together. Saw mounted

 

Leave a Reply

WordPress spam blocked by CleanTalk.